What is the purpose of filtering bottles?

Filtering bottles are used to purify tap water. The carbon filter included in them reduces chlorine and other substances that negatively affect the taste and smell of consumed water. Dafi filtering bottles are reusable, so you reduce the amount of plastic waste. One replaceable filter can substitute 300 disposable half-litre water bottles from the store.

How do they work?

Filtering bottles contain carbon filter. It removes the unpleasant taste and smell of chlorine, which is used as a water disinfectant. The activated carbon included in the reusable filter is obtained from coconut shells. It provides high filtration efficiency. Due to the fact that the bottles are small and ergonomic, you can always have them at your hand and use them in any place with access to tap water.

What must be done before using the Soft filter bottle for the first time?

When using the Soft filter bottle /the filter itself for the first time, you must follow these instructions:

Wash all parts of the bottle (except the filter) with warm water and washing-up liquid. Then rinse thoroughly.
Rinse the filter under running cold water (approximately 30 seconds).
Fill 2/3 of the bottle with cold tap water, place the filter inside and close the mouthpiece.
Shake the bottle vigorously several times. The water may become greyish – this is a natural phenomenon. Pour out the water and rinse the bottle.
Fill the bottle with cold tap water, install the filter and mouthpiece. Empty the entire bottle through the mouthpiece by pressing it strongly. Rinse the bottle and repeat the process.
Fill the bottle with cold tap water. The water is ready for consumption.
Warning! The Soft filtering bottle should not be scalded or washed in a dishwasher (high temperature may deform or completely destroy the product). The bottle can be washed with water at a temperature of up to 50 Celsius degrees. The carbon filter itself can be scalded in a separate vessel. Recommended sterilization time with boiling water: 60 seconds.

What must be done before using the Solid filter bottle for the first time?

Before the first use and each time the filter is changed:

Wash all the bottle components (except the filter) with water at a temperature of up to 50°C and washing-up liquid.
Rinse the filter under running cold water (about 60 seconds), with the stream directed at the filter housing openings.
Fill the bottle with tap water, put the filter in a special tube, and then install the tube in the bottle.
Cap your bottle and enjoy the tasty water wherever you are!
The bottle container can be washed in a dishwasher, while the remaining elements (screw cap, tube) should be washed with water at a temperature of up to 50oC. The carbon filter itself can be scalded in a separate vessel. Recommended sterilization time with boiling water: 60 seconds.

Remember! Carbon particles may appear in the water or it may have a greyish tint at time of use. This is a completely natural phenomenon that does not pose any health risk.

Are the filter bottles reusable?

Yes, filter bottles are reusable. The Soft filter bottle is made of PET. You should remember, the symbol “one in the triangle” only refers to the type of plastic, how it is recycled and its applicability to products that come into contact with food. It should be noted that the “2” or “3” marking on the plastic also does not indicate the possibility of using it two or three times. The labelling assigned is in compliance with the legal requirements included in the Regulation of the Minister of the Environment of September 3, 2014 on packaging labelling patterns, and the number “1” is an sequence number and does not indicate a single use product, which is confirmed by tests carried out by the independent accredited institution. The results can be found here:
https://dafi.pl/download/badania_hamilton.pdf

Tests for the migration of possible harmful substances are carried out in an acidic solution, which is a substance much more aggressive than water. At time of testing, the indicated modular fluid is kept in the bottle for 10 days and heated. We have all the necessary certificates from the raw material supplier, confirming the safety of our product.

The reservoir of the Solid filter bottle is made of Tritan®, which is also extremely durable, strong and reusable material.

In the case of Dafi bottles (as opposed to store water), the customer can fully control the way and time of storing the water in such bottle. In the case of shop waters, the storage time and e.g. the temperature (high overheating during transport), in which the water stays before it’s consumption, is unknown.

How to keep filter bottles clean?

Filter bottles should be washed regularly in warm water with a dish-washing liquid.

The Soft filtering bottle should not be washed in a dishwasher and should not be scalded with water at a temperature above 50°C (high temperature may deform or completely destroy the product).

The reservoir of the Solid filter bottle is dishwasher safe.

The bottle carbon filter (the same carbon filter in both types of bottle) can be scalded in a separate vessel. Recommended sterilization time with boiling water: 60 seconds.